This action automatically sets the input and output channel pop-up menus in both the Output and Input panes.
Note: The surround format chosen here only alters the layout/routing of channels to speakers in the I/O Assignments pane. The actual project surround format is determined in the project settings. See Default: Activates the default setup. For example, for the 5.1 format, input 1 is routed to the left speaker, input 2 to the right one, input 3 to left surround, input 4 to right surround, input 5 to the center speaker, and input 6 to the LFE channel.ITU: Assigns the International Telecommunications Union standard, used by many professionals.WG-4: Assigns the WG-4 standard, set by the DVD Forum for DVD-Audio.Use a custom input configuration: Choose the input of your audio interface from each of the active pop-up menus: Left, Center, Right, and so on.PDF
Default: Activates the default setup. For example, for the 5.1 format, input 1 is routed to the left speaker, input 2 to the right one, input 3 to left surround, input 4 to right surround, input 5 to the center speaker, and input 6 to the LFE channel.
ITU: Assigns the International Telecommunications Union standard, used by many professionals.
WG-4: Assigns the WG-4 standard, set by the DVD Forum for DVD-Audio.
Use a custom input configuration: Choose the input of your audio interface from each of the active pop-up menus: Left, Center, Right, and so on.
Logic Pro Instruments: PDF