Channel Strip Parameter pop-up menu: Choose the function controlled by channel strip encoders on the device. The choices are:
Volume: Channel strip encoders on the device set channel volume.
Pan: Channel strip encoders on the device set channel panorama position.
Format: Channel strip encoders on the device select channel format.
Input: Channel strip encoders on the device select channel input source.
Output: Channel strip encoders on the device select channel output (main outs/auxes/surround).
Automation: Channel strip encoders on the device select channel automation mode.
Group: Channel strip encoders on the device set group membership of the track. Editing the parameter allows you to set either “no group” or a single group. Enabling membership of multiple groups is not possible. (This can only be done directly in the Mixer.)
Displayed Par.: Channel strip encoders on the device set value of the automation parameter selected in the Tracks window. This is especially useful if you set the control surface to Arrange view, and your Tracks window shows multiple automation lanes.
Surround Parameter pop-up menu: Choose the surround parameter that rotary encoders control. The choices are:
Angle: Rotary encoders on the device set surround angle.
Diversity: Rotary encoders on the device set surround diversity (direction).
LFE: Rotary encoders on the device set LFE level.
Spread: Rotary encoders on the device set the Spread parameter of Stereo to Surround channel strips.
X: Rotary encoders on the device set surround X position.
Y: Rotary encoders on the device set surround Y position.
Center: Rotary encoders on the device set the Center channel level.
Elevation: Rotary encoders on the device adjust the position of the sound source between ear-level speaker channels and height speaker channels.
Note: The X and Y parameters are a different representation of the Angle and Diversity parameters, and thus are independent of them. The X and Y parameters support the use of surround joysticks.
EQ Band field: Drag vertically, or enter an integer value to set the current EQ band. This enables edits to a particular Channel EQ or Linear Phase EQ parameter for all tracks in the EQ Multi Channel View.
EQ Parameter pop-up menu: Choose the parameter of the selected EQ band controlled by the control surface encoders in EQ Multi Channel View. The choices are:
Frequency: Rotary encoders on the device set the frequency of the selected band.
Gain: Rotary encoders on the device set the gain of the selected band. This parameter controls the slope of the Low Cut (band 1) and High Cut (band 8) bands of the Channel and Linear Phase EQs.
Q: Rotary encoders on the device set the Q factor of the selected band.
Bypass: Rotary encoders on the device bypass the selected EQ band.
All EQs Parameter Page field: Drag vertically, or enter an integer value to set the EQ parameter displayed in EQ Channel Strip view.
The Channel and Linear Phase EQs feature eight bands per audio channel, with each band offering four parameters. All of these parameters can be accessed with your control surface.
If your control surface does not display all EQ parameters at once, you view them by stepping through parameter pages in sequence. For example, if your control surface has eight channel strips, you can directly control parameters 1 to 8 with knobs or sliders 1 to 8 when you switch to EQ Channel Strip Edit view. You then need to switch by a page to access parameters 9 to 16.
Download the guides:
Logic Pro User Guide: PDF